Micro RC Skydiver Stock Parachute - ARF

Yes, our skydivers are compatible with almost all 2.4GHz radio systems available on the market (FlySky, Futaba, RadioMaster, Spektrum, FrSky Turnigy, HobbyKing and more). Our skydivers only use 2 servos so any 3+ Channel radio will work. However, it must have a range of at least 100 meters.

We recommend to use micro size receivers for easier installation in the compact skydiver's body. Micro receivers such as the FlySky FS2A 4CH, 6CH FS-iA6, 4CH D8 D16 or 4100X 4CH will fit perfectly.

The servos must have the following dimensions in order to be installed in the skydiver mounts: 29.5x11.6x30.2mm / 1.17x0.46x1.20in. Any servo that is larger or smaller than these exact measurements will not fit in the skydiver. As for the torque, it must be at least 3.0kg.cm (42 oz / in).

We use 4.8V 700mAh Ni-Cd batteries in our micro skydivers. Just check on your receiver's specification for voltage and current intensity maximum range. You can also use small 2S LiPo batteries with a voltage regulator and JR 180mm / 7.08in cable adaptor.

You will need an RC aircraft to drop the skydiver from (airplane, helicopter or drone). You'll also need our dropbox mechanism to securely attach the skydiver under the aircraft and drop it when you want. You will need someone to fly the drop plane and someone controlling the skydiver. If you are using a drone or helicopter that has GPS, you can do everything alone.

No, our skydivers come fully assembled with the ordered electronics and the parachute is pre-installed. No gluing is required so you can fly it as soon as possible, the setup is also very easy, just install your receiver and bind it to your remote. Everything is clearly explained in the owner's manual included in the box.

Just as in full scale skydiving, we use an R/C airplane, helicopter or drone to take them to jump altitude.

For the Micro Skydiver a high lift, 1.2m wingspan airplane is plenty big enough. If it can carry 10 oz. you are good to go. For example you can use the 1.5m FMS Cessna, 1.3m Carbon Cub, 1.2m Timber X 1.2m, 1.4m Piper J3 Cub or Grasshopper, 1.2m Decathlon, 1.4m Freewing Pandora, 1.5m DHC-2 Beaver, 1.5m Kavan Pilatus PC-6 Porter, 1.62m Nexa Piper PA-18 Super Cub Burda and many more. Of course, the bigger and more power the faster you get to jump altitude.

Absolutely, our drone dropping system allows you to drop your Micro Skydiver from any drone as long as it is able to lift the skydiver's weight (287g / 10oz).

Minimum would be 300 ft / 100m (very short flight). A typical drop altitude for the Micro Skydiver is 900 ft / 250m.

IMPORTANT - Make sure to check your local field regulation for maximum flight altitude. The FAA limits you to 400 ft unless you receive prior authorization.

Skydivers are very easy to fly, the need for skill starts on the ground. Just as in full scale skydiving, packing the chute is most important. You must follow the instructions we give you in packing the chute and getting him ready to jump.

You'll find all these information in the Specifications tab in the product description.

Yes, please use the Micro RC Skydiver Custom Parachute - ARF in order to customize your own parachute.

Yes, RC skydivers are very easy to fly and compatible with any skill level, even kids can use them and have fun.

Our remote-controlled paratrooper is more than just a toy, it's an invitation to endless fun and discovery. Crafted by hand with premium materials, it offers extraordinary features that will surprise and delight you. It offers a unique and never-seen parachuting experience that will captivate both young and old.

Whether you're a model enthusiast or simply looking for an exciting new outdoor hobby, this skydiver is for you. I guarantee you will impress all your friends with this little guy! Order now and get ready to take control of the sky.

if you still haven't found the answer to your question in the list above, feel free to contact us.